SL23EP08SC-1H

Обзор SL23EP08SC-1H

Tube-method packaging is used for clock ICs. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. 16 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 2.5V is required. There is a Clock PLL called Clock which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 220MHz maximum. PLL clock is mounted in the way of Surface Mount. This clock generator would require a maximum supply voltage of 2.7V. The supply voltage for this frequency synthesizer should be kept above 2.3V for safety considerations. As far as the supply voltage is concerned, clock PLL can be used with 2.3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. According to the base part number SL23EP08, its related parts can be found. PF synthesizers is equipped with 16 pins. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 3.3V SUPPLY. Clock PLL is facilitated with 8 signal outputs to magnify output frequency as high as possible. There is a low timing skew at 0.5 nsmax with this RF synthesizer.

SL23EP08SC-1H Особенности

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-1H Приложения

There are a lot of Silicon Labs SL23EP08SC-1H Clock Generators applications.

• Исследование глубокого космоса
• 1 гигабитный Ethernet
• Вещательная связь
• Согласованное отслеживание операторов связи
• Синхронизация символов
• HDD-рекордеры
• плавление
• Информационно-развлекательные системы
• Двухточечные микроволновые системы
• DVD-рекордеры