CY2305SXC-1

Обзор CY2305SXC-1

It is packaged using the Tube method since it is a clock IC. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are a total of 8 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. Clock is designed for clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.6V of power. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 8-bit device designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY2305. There is an available 8 pin on the PLL. This time clock generator can handle a voltage of 3.3V as its supply voltage. The output frequency can be amplified as high as possible with its 5 signal outputs. Using a frequency of 133.33MHz allows frequency synthesizer to achieve high efficiencies. The maximal current supplied for phase locked loop's operation reaches 32mA.

Особенности CY2305SXC-1

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

Приложения CY2305SXC-1

There are a lot of Cypress Semiconductor Corp CY2305SXC-1 Clock Generators applications.

• Карты PCI Express
• Беспроводная базовая станция для LTE, LTE-advanced
• Серверы медиатрансляций
• Сотовая связь/4G
• Исследование глубокого космоса
• Смартфоны
• Фильтры идентификации
• Телекоммуникационные системы
• Снижение джиттера
• Подавление перекоса