АЦП10040CIMTX/НОПБ

Обзор ADC10040CIMTX/NOPB

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 28-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 40M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC10040 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital, Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2.5V~3.6V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The maximal analog input voltage of this electrical AD converter is 3V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 55.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 55.5mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 40 Msps.The minimal analog input voltage of this electrical AD converter is -2V.The maximal supply current amounts to 25mA.

Возможности ADC10040CIMTX/NOPB

1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 2.7V

Приложения ADC10040CIMTX/NOPB

There are a lot of Texas Instruments ADC10040CIMTX/NOPB ADC applications.

• Управление промышленными процессами
• Многочастотные, многомодовые цифровые приемники
• Цифровые мультиметры, ПЛК (программирующие логические контроллеры)
• Преобразователь
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Микро- и пикосотовые системы, программные радиоприемники
• Интерфейс Портативного терминала
• Приборы и испытательное оборудование
• CMOS-датчики изображения для мобильных приложений
• Цифровые системы формирования луча для ультразвука