74FCT388915TDJG8

74FCT388915TDJG8 Обзор

There is a clock generator embedded in the PLCC package. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 28 terminations in this file. Basically, this time clock generator needs a voltage of 3.3V. LVTTL is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 133MHz Max can be achieved with this clock-based frequency synthesizer. It is a 28-bit clock PLL designed specifically for microprocessors. There is an available 28 pin on the PLL. Electronic frequency generator can operate at low temperatures and can perform 0°C operations at a time. Despite its attenuated performance, this frequency synthesizer can last at 70°C. The supply voltage should be maintained at 3.3V for high efficiency. As a result, it is commonly classified as a type of Clock Drivers clock PLL. As a result of this digital clock generator, there is a low timing skew at 0.8 ns max. The digital clock generator has 7 high-enable output pins. By searching for the FCT family, it is possible to find similar electrical components. This clock generator cannot be powered by voltages higher than 3.6V. The lowest limit of supply voltage for this RF synthesizer is 3V. This electronic frequency generator is mainly used to make up PLL BASED CLOCK DRIVER logic circuits.

74FCT388915TDJG8 Особенности

Available in the PLCC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
7 true outputs

74FCT388915TDJG8 Приложения

There are a lot of Integrated Device Technology (IDT) 74FCT388915TDJG8 Clock Generators applications.

• Небольшое восстановление сигнала
• плавление
• Телевизоры
• Импульсные цифровые системы
• Высокоскоростная оптическая транспортная сеть (OTN)
• Высокочастотный индукционный нагрев
• Прецизионное вспомогательное измерение угла отклонения
• Радиоприемники
• Пейджеры
• Модуляция и демодуляция сигнала