MAX4250AAUK+T Overview

The linear amplifier is packaged in a SOT-23 case. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Strip case is used for delivering the op amp. The number of terminations approaches 5. In this case, there are 5 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 5 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 70μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 420μA and 10 . The voltage gain should stay at 77dB. Buffer op amp is equipped with 1 channels on the device. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis. Under 5.5V is the minimum supply voltage for this electric component. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.4V. It is recommended that you conduct this electronic part using the dual supply voltage of 2.75V.

MAX4250AAUK+T Features

5 Pins
supply voltage of 5V
77dB voltage gain

MAX4250AAUK+T Applications

There are a lot of Maxim Integrated MAX4250AAUK+T Instrumentational OP Amps applications.

Polarized electrodes
Cinema or auditorium audio system
Logarithmic operation circuits
Navigation
Weighing systems
Band-stop filter
Test equipment
Tablets
Communication
Inverse/same-phase proportional circuit

In Stock : 1337