ISL84051IAZ Overview

Due to its SSOP packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Bulk. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An switch multiplexer with 225Ohm internal resistance has a value of 225Ohm. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. An operating current of 1μA would be sufficient for this switch device. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. The voltage should be at least 2V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. 9V operating voltages can be used with this electrical part. Additional features of the electronic component include: VIDEO APPLICATION. A temperature above 85°C is not suitable for operation of the analogue multiplexer.

ISL84051IAZ Features

1 Channels
1μA Supply Current
Additional Features: VIDEO APPLICATION

ISL84051IAZ Applications

There are a lot of Intersil (Renesas Electronics America) ISL84051IAZ Analog Switches & Multiplexers ICs applications.

DSUs
Video signal routing
Precision test equipment
Digital access cross connects
65 V DACs
Audio signal routing
Audio and video switching
Communication systems
PDH Multiplexers
Access Concentrators

In Stock : 83